Titanium wire rolling is based on titanium and titanium alloy wire billet (disk or single root) as raw material, through drawing and get disk or single root wire products, including titanium iodide wire, titanium molybdenum alloy wire, titanium tantalum alloy wire, industrial pure titanium wire and other titanium alloy wire. Titanium iodide wire is used in instrument, instrument, electronics and other industrial sectors. This article will introduce the process parameters of titanium wire rolling.

(1) Heating system and final rolling temperature. The heating temperature of β titanium alloy before rolling is slightly lower than (a+P)/P transformation temperature. The rolling process is completed in the a+P phase zone. The heating time is calculated from 1 to 1.5mm/min. The pre-rolling heating temperature of titanium and titanium alloy bar billet and the final rolling temperature of profile are basically the same as the final milk temperature of milk bar.

(2) Selection of other process parameters. Because the output of titanium and titanium alloy rolled profiles is large, the length of products should not be too short, and the rolling speed should not be too large. In the actual production process, the rolling speed is generally 1~3m/s.

(3) According to the deformation resistance, wide spread value and elongation of titanium alloy, roll pass rolled titanium alloy profiles suitable for various types of steel profiles of titanium alloy are choose. If the batch of titanium alloy profiles is large, special roller pass rolling titanium alloy profiles can be designed according to the characteristics of titanium alloy.

Titanium wire rolling is based on titanium wire billet (disk or single root) as raw material, through drawing and get disk or single root wire products, including titanium iodide wire, titanium molybdenum alloy wire, titanium tantalum alloy wire, industrial pure titanium wire and other titanium alloy wire. Titanium iodide wire is used in instrument, instrument, electronics and other industrial sectors. Ti-15Mo alloy wire is the inspiratory source material of ultra-high vacuum titanium ion pump. Ti-15Ta alloy wire for ultra high vacuum industry inspiratory material. Industrial pure titanium and other titanium alloy wires include industrial pure titanium wire, Ti-3A1 wire, Ti-4A1-0.005B wire, Ti-5AI wire, Ti-5al-2.5Sn wire, Ti-5Al-2.5Sn-3Cu-l.5Zr wire, Ti-2A1_1.5Mn wire, Ti-3A1-1.5Mn wire, Ti-5 A1-4V wire, Ti-6A1-4V wire, etc., used as corrosion resistant parts, electrode materials, welding materials, etc., high strength TB2 and TB3 alloy wire used in aviation and aerospace fields.