Aluminum profile is mainly used in industrial production and manufacturing, such as automatic mechanical equipment, cover skeleton and the company according to their own mechanical equipment requirements customized mold, such as conveyor belt, elevator, dispensing machine, testing equipment, shelves, electronic machinery industry and clean room used in the majority.

In the processing of aluminum profiles, in order to reduce the friction of tools and data, the need to use some emulsified oil, after the completion of the processing of aluminum parts, the smooth oil remaining on the above is difficult to be removed by a simple wipe. This requires special oil removal agent to come and go.

So, how to deal with the oil on the surface of the aluminum profile?

At present, the commonly used degreasing agent has alkaline and acidic, alkaline degreasing method is to first soak aluminum products in caustic soda solution alkali corrosion, and then put 15-20 nitric acid solution to ash and polishing. This is also the pre-anodizing process for external anodizing.

First, soak oil removal, ash removal:

1. Before the use of a small amount of tap water, and then the aluminum product processing workpiece immersed in the pool; (Adjust the ash removal agent)

2. Participate in aluminum products oil removal agent, in 5- 10 seconds automatic heating;

3. 2~3 minutes to remove oil, clean with tap water;

4. Enter the deashing agent to deash (no more than 30 seconds);

5. Tap water cleaning ------ drying (drying) or stop oxidation.

In this process of use, when the heating temperature of the oil remover is higher, the oil remover can be properly diluted with tap water.

Two, spray oil removal, ash removal:

1. Add appropriate amount of water to dilute oil removal agent and ash removal agent respectively;

2. Adjust the nozzle Angle;

3. Ensure the spray time of aluminum products (not less than 30 seconds);

4. Ensure that aluminum products have circulating washing;