Aluminum alloy tube before use, we need to understand the knowledge or more, for these basic problems may be many users are not clear. Here is to tell you about the maintenance method of aluminum alloy tube. If you want to know, please come and see it. I hope it can help you.

When we talk about this aluminum alloy tube for you, in fact, it can probably be seen from its name that it is very good in corrosion resistance. In fact, aluminum alloy tube due to good plasticity, can be processed into a variety of plates, tubes and other profiles, suitable for pressure processing. The maintenance of aluminum alloy pipe is very important. You can carefully check the protective measures of the pipeline. The purpose of doing so is to ensure no damage and reduce the corrosion of the pipeline surface. If corrosion is found, the pipeline surface should be cleaned in time.

In addition, when you are in the maintenance of aluminum alloy tube also need to do is the safety valve and pressure gauge to often wipe, to ensure the sensitivity is correct, check on time, if found pollutants must be removed in time. When you do these jobs well, what you also need to do is to regularly check the health of the fastening bolts, to ensure that the fastening bolts are perfect, no corrosion, line fasteners are complete, and then can be used in the case of reliable fastening. And you need to pay attention to the vibration of the pipeline, abnormal vibration must be found to cut off the vibration source, strengthen the support and other vibration reduction measures, if found friction must be taken immediately. Generally speaking, if the aluminum alloy tube is found to stop, it is recommended that we should design this and exclude the internal medium, replace, clean, dry, and use inert gas protection as required. Please note that the outside is protected with paint, and the thermal insulation material of the piping should be clean, so as to avoid the corrosion of the pressure pipe.