Mainly share with you zirconium plate processing requirements and sintering procedures, hope to help your use.

Zirconia ceramics should not be very strange to you, because it has its own characteristics: high temperature resistance, high strength, wear resistance, chemical stability and so on, so that modern human widely used. So do you know the processing technology of zirconia plate? Do you know the sintering procedure of zirconia plate? Let's talk about the processing technology of zirconium plate and the sintering procedure of zirconia plate.

In the process of sintering molding and mechanical processing of zirconium plate, there are some small details must be paid attention to, so as to ensure the quality of the plate.

Processing requirements of zirconium plate:

Contour polishing: This step depends on the process choose.

A, pay attention to the distance of the needle per unit time, remember not to go too fast.

B, timely change the needle

Zirconia plates in different colors

Thickness of the working support: the thickness of the support should be at least 0.7mm before sintering. Not less than 0.4mm after sintering.

Sintering: Before sintering, clean the debris on the support in time. After sintering, the size of the support has a 25% shrinkage space. Therefore, it is necessary to use a matching sintering furnace (1600 degrees Celsius).

The above is the processing requirements of zirconium plate, I hope to help you.