To produce copper casting parts, whether it is copper smelting or aluminum, necessary inspection parts must be carried out, such as furnace body, oven door, trailer, pulley and blower cable, whether the equipment is normal, if there are any problems or any unsafe factors, if so, it must be dealt with in time to ensure the safety of the actual operation. At the same time, the cement produced in the process of copper and aluminum casting must be removed in time, and shall not accumulate or accumulate. Before loading and unloading, check whether there is any guide rail such as debris and whether it is recovered in time, and check whether the string and hook are normal, reliable and no problem.
The loading or unloading of large castings or workpieces must be smooth and stable, a part of the castings or adjacent workpieces must have enough space, should not be too tight, the loading height must not exceed the specified requirements, before the release of the oven, must clean, uninstall and transport the oven door, the staff should pay attention to safety, but also pay attention to the surrounding environment of the furnace, can not stack other items.
In addition to the actual operation of the process, there are many aspects of copper-aluminum casting, including the process yield of the product and the shape and structure of the plate design to be considered, the precision requirements and the surface size of the product, which is to reduce the product, the product or the required port size without defects, in addition, copper-aluminum casting has certain design principles, which must be completed through the selection of appropriate materials, The size of the product must be determined before production, and the thickness of the wall must be uniform when making the product.
The corners of the product should not be sharp, the whole process has good working conditions, high productivity, easy to understand workers, and provides a good basis for the formation of high quality castings, for non-ferrous metal castings, it also meets the requirements of some commonly used technologies and other castings.